EasyManua.ls Logo

Adexa HZB-30F - Explosive Drawings and Control Buttons; Component Identification Diagram; Control Button Functionality Description

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
DON/OFFbutton
When the unit is off, press this button to turn on the unit; And during the autom atic-cleaning
program, or normal ice-making state, press this button to turn off the unit at once;
And also if the unit is s et with the Timer, press this button to cancel the Timer
setting.
When the unit is making the ice cube, press this button for more than 5 seconds, the unit will
switch to ice harvest process by f orce.
E/F+-button
Use to adjust the ice-making process dur
ation period length, the de fault setting is zero , 1
minute adding or dec reasing per each pressing of +” or “-” button.
Also to adjust the delay time of the timer, the default setting is zero, 1 hour ad ding or
decreasing per each pressing of “+” or “-” button.
4) EXPLOSIVE DRAWINGS

Related product manuals