ADJ DMX Operator - Scene and Bank Management; Copy Bank of Scenes; Delete Bank of Scenes; Delete Scene

ADJ Products, LLC - www.adj.com - DMX Operator User Manual Page 12
DMX Operator Editing Scenes
COPY BANK OF SCENES:
This function will copy the settings of one bank to another.
1. Press the PROGRAM BUTTON (6) for three seconds to activate Program Mode. The
LCD DISPLAY (3) will indicate Program Mode by displaying a continuous fast blinking dot
next to “PROG”.
2. Select the BANK BUTTON (4) you want to copy
3. Press and release the MIDI/REC BUTTON (7)
4. Select the BANK BUTTON (4) you wish to record to.
5. Press AUDIO/BANK COPY BUTTON (9), and the LCD DISPLAY (3) will flash briefly to indicate
the function has been completed.
DELETE BANK OF SCENES:
1. Press the PROGRAM BUTTON (6) for three seconds to activate Program Mode. The
LCD DISPLAY (3) will indicate Program Mode by displaying a continuous fast blinking dot
next to “PROG”.
2. Select the BANK BUTTON (4) you want to delete
3. Press and hold the AUTO/DEL BUTTON (8).
4. While holding down the AUTO/DEL BUTTON (8) press and hold the AUDIO/BANK COPY
BUTTON (9) at the same time.
5. Release both buttons at the same time, and the LCD DISPLAY (3) should flash momentarily
to indicate the function has been completed.
DELETE SCENE:
This function will reset all DMX Channels in a single SCENE back to 0.
1. While pressing and holding AUTO/DEL BUTTON (8), Press and release the SCENE BUTTON (2)
1-8 you want to delete.