1.
UNBOXING/SET UP
Please read before connecting to power and operation
When moving the boxed item, only insert and
lift where the markings are instructing.
Place the box in a position that is flat and level,
and that you have sufficient space to unbox
and remove the Adkins Inline 800 from the palette.
Remove the straps, followed by
the lid then the four sides, taking care not to
damaged/scratch the Adkins Inline 800.
After the removal of the sides, place the lifting handles (x4) in to the areas marked below
and prepare to lift from the palette base. A minimum of 4 people are required but due to
the weight more may be required.
page 3
Continued
To Next Page
Loading...
