Adleepower AP4G3 - Page 30

Analog / Digtal
frequency
CD10
0 : Operation frequency change by using or key and
confirm by .
1 : Operation frequency depends on the angle of the knob.
Note : Using key to change motor speed when
CD01=0, then ”OPE3” warning message would be indicated.
28
Setting Range 0 or 1
Default Value 1
RPM
stop
(HZ)
Time(sec)
(HZ)
RPM
Start frequency
CD09=0
CD09=1
run
stop
run
Time(sec)
Dynamic brake /
Free running
CD11
0 : Activates dynamic brake
function when deceleration.
1 : Output cut off when accept
a stop command to be free
running.
CD11=1
CD11=0
FWD/REV
Command
time
time
time
F
F
Setting Range 0 or 1
Default Value 0
ENTER