0 : RUN/STOP Command from operation panel.
1 : RUN/STOP Command from control terminal.
Note : If inadequate operation, the
“OPE4“ warning message would
be indicated.
29
0 : Normal
1 : F306
2 : RS485 communication
Note : After finished this parameter setting, please repower “ON“.
Source operation
command
CD13
Terminal / Keypad
command
CD12
Setting Range 0 or 1
60HZ region 0
50HZ region 1
Max
F
400HZ
Speed command
0.5HZ
Maximum
frequency limit
CD14
Setting Range 0.50 ~ 400.00HZ
60HZ region 120.00HZ
50HZ region 50.00HZ
Setting Range 0 ~ 2
Default Value 2
To Next Page
Loading...
