Address setting
CD74
Each drive must have unique identified addrss if they are controlled by
RS485 communication. Each address connot be duplicated.
0 : broadcast to all inverter.
Setting Range 1 ~ 255
Default Value 1
Transmission speed
CD75
Setting the transmission speed between computer and drive.
0 : 2400 bits/second.
1 : 4800 bits/second.
2 : 9600 bits/second.
3 : 19200 bits/second.
53
Setting Range 0 ~ 3
Default Value 3
Transmission fault
treatment
CD76
0 : Alarm and keep operation.
1 : Alarm and decelerate to stop.
2 : Alarm and free to stop.
3 : No alarm and keep operation.
Use panel or write address 100=4 to clear the transmission fault.
Note : Warning means Fault Relay active and display “LOSE” .
Setting Range 0 ~ 3
Default Value 3
To Next Page
Loading...
