RUN terminal
CD91
ARR terminal
CD92
0 : RUN(CD46).
1 : ARR(CD55).
2 : Section ending signal : Terminal output 10ms long signal if each speed
is finished.
3 : Cycle ending signal : Terminal output 10ms long signal if each cycle is
finished.
76
Setting Range 0 ~ 3
Default value 0
Setting Range 0 ~ 3
Default value 1
※ CD94=0
Modified CD00 at stand by mode, the data write to EEPROM.
Modified CD00 at running mode, the data don’t write to EEPROM.
※ CD94=1
Modified CD00 at stand by mode or running mode, the data don’t write
to EEPROM.
CD00 memory
mode for
communication
speed command
CD94
Setting Range 0 or 1
Default value 0
To Next Page
Loading...
