ADPRO iFT User Manual

 
ADPROiFTGateway
HardwareInstallationManual
February2019
Doc.33104_01
FirmwareversionXO4.03


ADPRO iFT Specifications

General

Power Supply	12V DC
Operating System	Linux
Ethernet	10/100 Mbps
Protocols	TCP/IP, HTTP, DHCP, NTP, SMTP
Input Interfaces	RS-232/422/485, USB
Output Interfaces	RS-232/422/485, USB
Video Compression	MJPEG

Summary

Technical Specifications

System and Network Configuration

Power Supply and Connectivity

Information on power requirements, USB ports, and network connection types.

About the iFT Gateway

Power Requirements and Safety

Essential power needs and safety guidelines for the iFT Gateway.

Memory Card Management

Placing a Memory Card

Procedure for inserting or replacing the memory card.

Preparing Used Memory Cards

Instructions for formatting used memory cards for recording.

Device Connectors

Physical Port Overview

Network Connection

Wired Network Setup

Instructions for connecting the iFT Gateway via Ethernet.

Wireless Network Setup

Details on enabling and configuring the Wi-Fi connection.

XO I/O Interface USB Modules

Inputs and Outputs Overview

Connecting I/O Wires

Procedure for connecting wires to Dinkle or Phoenix connectors.

Network I/O Units (Net I/O)

Unit Description and Expansion

Powering and Configuration

4G Via Wingle

Wingle Setup for 4G Connectivity

Audio Functionality

Audio Output and Talkback

Features and options for talkback audio functionality.

Talkback Troubleshooting and PC Mic Setup

Resolving talkback issues and configuring PC microphones.

Using IP Audio Devices

Diagnostics and Troubleshooting

Log File Retrieval

Server Report Access

Maintenance