Crazy Tower Arcade Manual V7.1
Chapter 06 – Service & Repair
24 | P a g e
Wireless Internet Configuration
Your network can be configured via Ethernet cable or Wireless.
If you have an Ethernet cable available to be plugged in, insert it into the motherboard LAN
RJ45 connector.
If not, here is how to configure your wireless network with your own existing Wi-Fi network.
-Start the unit.
-There will be Adrenaline Amusements wallpaper with a 150 seconds delay before the attract
mode shows up. It gives enough time for a wireless network to connect.
(This delay will be present on each reboot if you don’t connect your unit to the Internet)*.
-Open the coin door and press the Operator button.
-Choose Configure Wi-Fi.
-Connect a USB keyboard.
-In the list of networks, click the network you want to connect to and click connect.
-Enter your security key.
Having your unit connected to the Internet includes free software live update!
*If you do not connect your unit to the Internet, you can bypass the 150-seconds Internet
lookup delay via the Operator Menu.
To Next Page
Loading...
