Page 19
Exit Sound or Silent Exit
Note: This option is not available with all security panels.
The exit delay is the amount of time between the time you send the arm command to the security
panel and the time the entry/exit door is actually armed—that is, the amount of time you are allowed
to exit the premises through the entry/exit door without setting off an alarm.
If this option is off, the security system chimes after you send the arm command until the exit delay
period is complete. If this option is on, the security panel does not chime during the exit delay.
Note: Turning this option on is useful when you want to leave the house and arm the security
system, but you do not want to wake people who are sleeping in the house.
Except for Silent Exit, these settings remain in effect until you explicitly change them.
When the system is armed, the system icon changes to red, and the ARM button changes to DISARM.
To disarm the system, touch DISARM, enter your access code, and touch OK.
Refer to the documentation for your security panel for more information about arming and disarming the
security system.
ADTPulse
SM
Interactive Solutions Touch Screen User Guide
To Next Page
Loading...
Need help?
General
