ADTPulse
SM
Interactive Solutions Touch Screen User Guide
Page 35
Night Mode
Touch Night Mode to darken the touch screen display. This feature allows you to eliminate the light from
the touch screen when someone in the room is sleeping. While the touch screen is in night mode, you can
touch anywhere on the screen or press the Home button when you are ready to wake it up.
Note: If the system is armed and an entry/exit door opens while the touch screen is in night mode,
the touch screen displays a keypad so you can enter the access code to disarm the system. If
you enter the access code and disarm the system at the security panel, the touch screen
returns to night mode. If an alarm sounds, however, the touch screen does not return to night
mode. It displays the appropriate alarm screen and emits the appropriate sounds.
To Next Page
Loading...
Need help?
General
