ADTECH9 Series CNC Programming Manual
(F Definition of parameter name, used together with FGH)
(G Parameter value, used together with FGH)
(H Value range, used together with FGH)
CTSTART
CAMINFO
A 1
B 11
C \ADT\CAMTEACH\G151.bmp
D 380x300
E 151
F Round hold (G151)
G 10.0
H 0,0
F Space X between the hole centers (O)
G -9999.0
H -9999,9999
F Space Y between the hole centers (O)
G 0.0
H -9999,9999
F Space Z between the hole centers (O)
G 0.0
H -9999,9999
F Space A between the hole centers (O)
G 0.0
H -9999,9999
F Radius R of the hole
G 0.0
H 0.5,9999
F Left gun (Open 1 Close 0)
G 0
H 0,1
F Right gun (Open 1 Close 0)
G 0
To Next Page
Loading...
