Adtech CNC9640 - Keywords Description

ADTECH9 Series CNC Programming Manual
<END> //Template end
M30
%
6.2 Keywords description
Keyword
Description
Program
header/end and
process control
<HEADER>
Template header, used to configure program
start, initialize code;
<END>
Template end, used to configure end code of
the program
Processing
elements and
the breakpoint
configuration
<POINT>
Point configuration of current layer
<LINE>
Line configuration of current layer
<ARCW>
Forward arc configuration of current layer
<ARCI>
Reverse arc configuration of current layer
<CUTTERBACK>
Tool jump configuration of discontinuous
point in current layer
Coordinate data
configuration
<X>, <Y>
Configure point coordinates and end
coordinates of the line
<I>, <J>
Configure the offset of arc center relative to
the starting point
Layer
configuration
keyword
<ADTLAYER 1 HEAD>
The head of layer 1, used to configure the
initialization code of current level, such as tool
change command
<ADTLAYER 1 HEADEND>
The end of layer 1, used to configure the end
code of current layer