Physical Descriptions NetVanta 3100 Series Hardware Installation Guide
20 Copyright © 2015 ADTRAN, Inc. 61700600L2-34C
If the factory default switch is pressed and held for 5 seconds after boot, the switch ports on the
NetVanta 3130 will default to 10.10.10.1 and all access policies will be removed from those interfaces.
If the factory default switch is pressed for 30 seconds, a default configuration will overwrite your
existing configuration and reboot the unit.
4 Switch Port Interfaces
Ports 1 through 4 are RJ-45 connectors used to access the 10/100Base-T Ethernet switch.
Power Connection
The rear panel has a 12V input for the DC power supply included in the shipment. Refer to Wall
Mounting a Single NetVanta 3140 (P/N 1700341F1) on page 28 for connection details.
NetVanta 3140 Series
The NetVanta 3140 Series is a fixed-port, high-performance Ethernet router solution to support converged
access and high-quality voice services. It provides three routed auto-sensing 10/100/1000Base-T Ethernet
LAN interfaces. This product is ideal for carrier-bundled service offerings and enterprise-level Internet
access for secure, high-speed corporate connectivity. The NetVanta 3140 has the ability to perform 3G/4G
backup using a type A USB host connector (future release). IPsec VPN support is included with a further
software upgrade.
NetVanta 3140 Features and Specifications
The NetVanta 3140 offers the following features:
• Three routed 10/100/1000Base-T Ethernet ports
• USB port to support 3G or 4G modules (future release)
• Fixed port IP access router for MPLS, Direct Internet Access, Hosted VoIP, and PPPoE networks
• ADTRAN Operating System (AOS) command line interface (CLI)
• User-friendly, web-based graphical user interface (GUI)
• Standards-based eBGP/iBGP, OSPF, RIP, static routing and bridging protocols
• Integral stateful inspection firewall protects against denial of service (DoS) attacks
• 500 IPsec VPN tunnels (software optional) with DES/3DES/AES encryption
• Compatible with IPsec VPN-equipped devices
• Quality of service (QoS) with low latency queuing (LLQ), weighted fair queuing (WFQ), class-based
weighted fair queuing (CBWFQ), and DiffServ marking
• Built-in alert and logging mechanisms
• Network address translation (NAT/NAPT), 1:1 NAT port translation, and NAT Traversal version 2
• NAT-compliant SIP ALG
• DHCP client, server, and relay
• XAUTH including RADIUS and RSA SecurID
• AAA support using local user database, RADIUS, and TACACS+
• Flash memory supports multiple images of AOS
• Remotely configurable and field upgradeable using TFTP or FTP
• Telnet, HTTP, SSH, SSL, Syslog, craft/console port, or SNMP management options
• Dimensions 1700340F1: 1.63-inch H x 9.00-inch W x 6.38-inch D
• Dimensions 1700341F1: 1.7-inch H x 8.0-inch W x 11.0-inch D
To Next Page
Loading...
Need help?
General
