Advanced Electronics Mx-4400 - Page 4

www.advancedco.com
4
3.1.2 Memory Lock 28
3.1.3 Navigating through menus 28
3.1.4 Changing Text Descriptions 29
3.1.5 Numeric data entry 29
3.2 RECOMMENDED PROGRAMMING PROCEDURE 30
3.3 LEVEL 3 MENU FUNCTIONS 30
3.3.1 Loops 31
3.3.2 Loops – View/Edit 31
3.3.2.1 State 31
3.3.2.2 Type 31
3.3.2.3 Value 32
3.3.2.4 Zone 32
3.3.2.5 Device Text 32
3.3.2.6 Action 32
3.3.2.7 Sensitivity 32
3.3.2.8 O/P Group 34
3.3.2.9 Additional Info 35
3.3.2.10 Device Testing 35
3.3.3 Loops – Auto Learn 36
3.3.3.1 Normal Procedure / Initial learn 36
3.3.3.2 Procedure if the Panel finds Devices Missing 36
3.3.3.3 Procedure if the Panel finds Devices Added 37
3.3.3.4 Procedure if the Panel finds Devices Changed 37
3.3.4 Loop – Calibrate 37
3.3.5 Loop – Driver 37
3.3.6 Zones 37
3.3.7 Exit 39
3.3.8 Outputs 39
3.3.8.1 Default Output Settings 40
3.3.8.2 Cause 40
3.3.8.3 Style 41
3.3.8.4 Copying Output Settings to Multiple Zones 42
3.3.9 Investigation Delays 42
3.3.9.1 Overriding Delays at Level 1 42
3.3.10 Time and Date 42
3.3.11 View Options 43
3.3.12 Passwords 43
3.3.13 Panel 43
3.3.13.1 AC Fail Delay 43
3.3.14 PC Config 44
3.3.15 Setup 44
3.3.15.1 Network 44
3.3.15.2 Panel Zone 44
3.3.15.3 Service Number 44
3.3.15.4 Service Due Date 45
3.3.15.5 Trace Logging Mode 45
3.3.15.6 Detector Blinking 45
3.3.15.7 Earth Fault Notification 46
3.3.15.8 Routing Interface 46
3.3.15.9 Resound Alarms 46
3.3.15.10 Program ID 46
3.3.15.11 Config Data 47
4 SERVICE AND MAINTENANCE 48
4.1 MAINTENANCE SCHEDULE 48
4.1.1 Daily Actions 48
4.1.2 Monthly Actions 48
4.1.3 Quarterly Actions 48
4.1.4 Annual Actions 48
4.2 REPLACEMENT OF COMPONENTS 49
4.2.1 Batteries 49
4.2.1.1 Standby Batteries 49
4.2.1.2 Lithium Battery 50
4.2.2 Liquid Crystal Display 50
5 APPENDICES 51
5.1 APPENDIX 1 – FORGOTTEN LEVEL 3 PASSWORD 51