Chapter 2 Operating the Instrument
16
Anoxomat® III User’sGuide
Disconnect and incubate
Disconnect the jar by pulling the outer ring of the
snap-shut coupling downward. The jar tube should snap
out of the coupling. This closes the snap-shut coupling
and maintains air tightness of the jar.
Hold the black tube with your other hand when
disconnecting from the jar.
To leave the process report screen, press Start. The
Anoxomat returns to the Main screen and is ready for the
next job.
The last performed recipe stays active. You can check
this on the Active Recipe screen.
To Next Page
Loading...
