Advanced Instruments Anoxomat Mark II CTS User Manual

11
Anoxomat Mark II CTS User’s guide
Chapter 1 Installation and setup
If your gas composition is not available from the pull-
down list, you can define the mixture by selecting “Other
gas-composition”, which will display the Edit Gas Mixture
screen (Fig. 1.9). Enter the required percentages in each
field and press Close to exit the screen and save changes.
If the second or third gas connection will not be used,
leave the field empty or select “None”.
Setup language
If you need to change the user interface language
of your Anoxomat, press Language on the setup
screen and select your preference from the
Language screen (Fig. 1.10).
Setup date and time
If your Anoxomat is equipped with a printer and/or is
using a data interface, the date and time of a process will
appear on the printout or in the database (Fig. 1.11).
To set the date and time, press Date/time on the
Setup screen. Using numbers, enter the date as
two-digit day, two-digit month, and four-digit year (e.g.,
30-04-2010 = April 30, 2010). Based on 24-hour clock,
set the time in two-digit hour and two-digit minutes
(e.g., 09-07 = 9:07 AM).
Exit Setup
Press Close to exit the Setup Menu and return to the
Main Operation Screen.
Fig. 1.9: Edit gas mixture
Fig. 1.10: Setup language
Fig. 1.11: Set date/time

Advanced Instruments Anoxomat Mark II CTS Specifications

General

Brand	Advanced Instruments
Model	Anoxomat Mark II CTS
Category	Medical Equipment
Language	English