Advanced Instruments Anoxomat Mark II CTS User Manual

Chapter 3 Optional functions
24
Anoxomat Mark II CTS User’s guide
6. Define QA level and maximum evacuation level.
The default quality assurance level for this particular
recipe can be set here (Fig. 3.6). This level will remain
selected for this particular program until edited in
this menu.
The catalyst test is only performed in case a required
oxygen level of 0% has been chosen. The “Disabled”
button, should be used when creating a new recipe and
a catalyst is a not required.
The maximum evacuation level in standard recipes is a
default setting of 205 mbar. As this may be harmful to
the culture or the agar, recipes can be adapted to 400,
500 or 600 mbar. Depending upon the required O level,
the Anoxomat may perform more cycles than usual to
reach the gas mixture in the jar.
7. Specify the recipe name. Click in the space and the
screen keyboard will appear. Enter the description for
this recipe. The name and other relevant information
of the recipe will appear in the Active Program section
on the Main screen.
8. Save the recipe. Press the Close button to save your
new recipe. The recipe can be revised at any time.
Changing a user-defined recipe
To change a user-defined recipe, select Program recipes
at the bottom of the Main screen. The Program Recipes
screen will appear. Select the recipe you want to change,
and the Edit Recipe screen will appear.
After making your changes, press Close to save
the recipe.
Fig. 3.6: Define QA and maximum evacuation levels

Advanced Instruments Anoxomat Mark II CTS Specifications

General

Brand	Advanced Instruments
Model	Anoxomat Mark II CTS
Category	Medical Equipment
Language	English