2.4.1.3 Warnings
[Warning Status]
1 of 2
VALVE MONITOR INPUT.
>VALVE CLOSED .
PRESSURE MONITOR
>LOW PRESSURE
If there are warning conditions in the extinguishant system present,
the display will show the number of conditions and a list of the
warning conditions.
Press the buttons to scroll through the list of warnings.
Press the ESC button to return to the previous menu.
2.4.1.4 Log
The panel contains a history log of fires, faults and other conditions. This can be filtered to show only the fire
alarm and trigger events that could result in the release of the extinguishant. In addition, a total fire alarm count
is also available.
[Event Log Menu]
ALL EVENTS .
FIRES & TRIGGERS
ALARM COUNT
On selection, a menu is presented to select the required view.
Press the buttons to scroll through the list and press the ✔
button to select the required view option.
Press the ESC button to return to the previous menu.
2.4.1.4.1 View Events
Select either the ALL EVENTS or the FIRES + TRIGGERS option. On selection, the latest recorded entry is
shown. For example:
[Event Log Viewer]
EVENT: 55/55
The upper two lines show the menu option and the number of the
entry currently being viewed.
Press the buttons to scroll through the list of entries.
Press the ESC button to return to the previous menu.
The next four lines show the details of the log entry.
20/09/2007 10:21:15
CONTROL PANEL
DETECTION ZONE 3
>OPEN CIRCUIT
[Event Log Viewer]
EVENT: 41/58
Line 1 – shows the date and time the entry was recorded
Line 2 – shows the origin
Line 3 – shows the circuit / function affected
Line 4 – shows specific details
20/09/2007 09:22:18
USER4
DETECTION ZONE 3
>DISABLE
[Event Log Viewer]
EVENT: 11/58
Line 1 – shows the date and time the entry was recorded
Line 2 – shows the origin
Line 3 – shows the circuit / function affected
Line 4 – shows specific details
19/09/2007 12:25:11
CONTROL PANEL
DETECTION ZONE 3
>FIRE ALARM
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
Need help?
General
