Advanced Ex-3001 User Manual

8
2.1.3 Enable Controls
Controls are normally disabled. If a level 2 Access key-switch is fitted use this in preference to passwords.
To enable the control keys or gain access to the Level 2, press the Menu button. The display shows the
following:
[CONTROLS DISABLED]
ENABLE CONTROLS
VIEW
LED TEST
Enter Your Password
Enter Your Password
**
Press the ✔ button to select the
‘Enable Controls’ option.
The display prompts for entry of
the password.
Enter the password. As each
number is pressed, an *
character is displayed. Finally,
press the ✔ button to confirm.
[Level 2 Menu]
VIEW .
TEST
EXTINGUISH MODES
DISABLE / ENABLE
EXIT LEVEL 2
Enter Your Password
Not Recognized!
The display then shows the Level 2
Menu options.
If the password is incorrect (or if
not entered in time) the above
message is shown.
If a control button is pressed at Level 1, the display prompts for password entry. To continue, enter the
password. If the password is valid, the relevant control function will be activated and the display will remain at
Level 1.
2.1.4 Navigating through menus
When a menu is displayed, use the  buttons to highlight the required menu option and then press the ✔
button to select it.
Press the ESC button from within a menu option to return to the previous menu.
The display will revert to the status mode display after 60 seconds on no activity (15 seconds in a fire alarm
condition). Press the Menu button again to return to the menu option.
A programmable timer can be configured to automatically cancel Level 2 access. This time can be between 1
and 5 minutes. If no buttons are pressed for the timeout period, then Level 2 access will be cancelled. It will be
necessary to re-enter the password to regain access to control and Level 2 Menu functions.
2.1.5 Numeric data entry
Numbers are entered by moving to the required field, and then typing in the required number, followed by the ✔
button. The display returns to the previous menu.
If the number is entered incorrectly, press the  button to clear the entry and then re-enter the required
number. Alternatively, press the ESC button to cancel the number entry and return to the previous menu.
www.acornfiresecurity.com
www.acornfiresecurity.com

Advanced Ex-3001 Specifications

General

Brand	Advanced
Model	Ex-3001
Category	Control Panel
Language	English