45 Chapter 3
seconds will turn off the system, whereas pushing the button momentarily
(for less than 4 seconds) will switch the system to “suspend” mode.
3.7.9 CPU THRM-Throttling
This field allows you to select the CPU THRM-Throttling rate. The
choices: "75.0%", "50.0%", and "25.0%".
3.7.10 Resume on LAN/PCI PME#
To enabled or disable the function to resume the system by PCI card or
LAN. The Choice : "Enabled", "Disabled".
3.7.11 Resume on Ring
This item allows you to wake up the system via COM port from the
remotehost. The choices: "Enabled", "Disabled".
3.7.12 Resume on Alarm
The Choice : "Enabled", "Disabled".
3.7.13 Primary IDE 0 (1) and Secondary IDE 0 (1)
When Enabled, the system will resume from suspend mode if Primary
IDE 0 (1) or Secondary IDE 0 (1) is active. The choice: "Enabled", "Dis-
abled".
3.7.14 FDD, COM, LPT PORT
When Enabled, the system will resume from suspend mode if FDD, COM
port, or LPT port is active. The choice: "Enabled", "Disabled".
To Next Page
Loading...
Need help?
General
