2.4.15 Typematic Delay
(msec)
Typematic delay
is the
time
interval between
the appearances
of two consecutive
characters,
when the key
is continuously
depressed. The
input values for this
category are:
250, 500, 750, and
1000 (ms).
2.4.16 Security
Option
This category determines
whether the password is
required
when the sys- tem
boots up or
only when entering setup. The options are:
•
System
:
The system
will
not boot,
and access to Setup will be also
denied unless the
correct
password is entered at
the prompt.
•
Setup
:
The system will boot, but access to Setup
will
be
denied unless the
correct password is
entered at the prompt.
Note:
To disable security,
select PASSWORD SET- TING in the
main menu.
Then, you
will be asked to enter a password.
Simply press <Enter> to disable security. When
security is
disabled, the system will
boot and you can enter
Setup freely.
2.4.17 APIC
Mode
This setting allows
you to
enable
the APIC mode.
The choices
are
“Disabled” or
“Enabled.”
AIMB-763 2-7
To Next Page
Loading...
