2.7.1 PCI Express PM Function
This filed allows you to enable or disable system wake up by PCI Express PME
(Power Management Event).
2.7.2 ACPI Function
The choices
are “Enabled” and “Disabled”.
2.7.3 ACPI Suspend Type
This item allows you to set ACPI suspend type to S1/POS(Power On Suspend) or
S3/STR(Suspend To RAM).
2.7.4 Run VGABIOS if S3 Resume
Select “Auto” to run VGA BIOS if S3 resume automatically. The “Yes” enables
running VGA BIOS if S3 resume. The “No” disables this function.
2.7.5 Power Management
This
category
allows you to select the type
(or
degree)
of power saving and is
directly related to the
following modes:
•
HDD Power
Down
•
Suspend Mode
There are three
selections for Power Management, and
they have fixed mode
settings.
Table 2.1:
Power Saving
Saving Mode Function
Min Saving Minimum power management., Suspend Mode = 1
hr., and HDD Power Down = 15 min.
Max Saving Maximum power management., Suspend Mode = 1
min., and HDD Power Down = 1 min.
User Defined Allows you to set each mode individually. When not
(Default) disabled, each of the ranges are from 1 min. to 1 hr. except for
HDD Power Down which ranges from 1 min. to 15 min., and
disabled.
2.7.6 Video Off Method
Use
this to select
the
method to turn off the video. The
choices
are
“Blank
Screen”, “V/H
SYNC+
Blank”, and “DPMS”.
2.7.7 Video Off In Suspend
When the system is
in
suspend
mode,
the video
will turn off. The
choices are
“No”
and “Yes”.
AIMB-763 2-17
To Next Page
Loading...
Need help?
General
