EKI-1528/1526 User Manual 24
DHCP + Auto-IP
DHCP Server assigned IP address, Subnet Mask, Default Gateway, and DNS.
BOOTP + Auto-IP
BOOTP Server assigned IP address.
DHCP + BOOTP + Auto-IP
DHCP Server assigned IP address, Subnet Mask, Default Gateway, and DNS, or
BOOTP Server assigned IP address. (If the DHCP Server does not respond)
DNS Setting
In order to use DNS feature, you need to set the IP address of the DNS server to be
able to access the host with the domain name. The EKI-1500 serial device server
provides Primary DNS Server and Secondary DNS Server configuration items to set
the IP address of the DNS server. Secondary DNS Server is included for use when
Primary DNS server is unavailable.
3.4 Serial Settings
This section explains how to configure the EKI-1528/1526 serial communication
parameters using this utility. There are various operation modes that are suitable for
different application.
Click on the "+" before the model name (e.g. EKI-1526), and the utility will expand the
tree structure to show the individual device name. And click on the “+” before the
device name, and the utility will expand the interfaces on this device server. Select
the serial interface.
Note! When you have finished the configuration of these settings for each cat-
egory, please press the “Apply” button in order to make these settings
effective on the Serial Device Server. (Will reboot your Serial Device
Server immediately)
To Next Page
Loading...
Need help?
General
