71 EKI-1528/1526 User Manual
Chapter 6 Telnet/Serial Console Configuration
Connection Success
After connecting the device in console mode, you can simply press <Enter> to entry
the console configuration.
6.4 Command List
Table 6.1: Console Command List
Command Function Description
system Show or configure the system information
port Show or configure the serial ports information
portadv Show or configure the serial ports advanced settings
mvcom Show or configure the serial ports in Virtual COM mode
mctrl Show or configure the serial ports in Control mode (USDG)
mdata Show or configure the serial ports in Data mode (USDG)
net Show or configure the Ethernet ports settings
password Set or change the password
apply Write settings to the flash memory and reboot the system immediately
exit Terminate the shell session
help Display help information of command list
<Tab> <Tab> Display help information of command list
import Import the serial device server all settings
export Export the serial device server all settings
monitor Monitor the serial ports status
alarm Show or configure the auto warning functions including mail alarm and
SNMP alarm
time Show or configure the time information
service Enable or disable the web, Telnet and SNMP functions
To Next Page
Loading...
Need help?
General
