77 EKI-1528/1526 User Manual
Chapter 6 Telnet/Serial Console Configuration
mdata
Show and setup the Data mode
[Usage] mdata
[Function] Show all serial ports mode and related information
[Usage] mdata nn|all
[Function] Set the “nn”th or all serial ports as the Data mode
[Usage] mdata nn|all protocol TCP|UDP
[Function] Set the “nn”th or all serial ports’ transmit protocol as TCP or UDP
[Usage] mdata nn|all idleto XX lsport XXXX atport XXXX
[Function] Set the “nn”th or all serial ports data idle timeout, listen port, and AT com-
mand port
[Usage] mdata nn|all respto XX framebk XX
[Function] Set the “nn”th or all serial ports response timeout and frame break
[Usage] mdata nn|all peernum 1|2|3|4|5|6|7|8|9|10|11|12|13|14|15|16 peer
XX.XX.XX.XX:ppp
[Function] Set the peer IP address and port for receive data
To Next Page
Loading...
Need help?
General
