ICR
-1601
5.6.7 Factory Reset
It is possible to restore the default factory configuration of the router by pressing the Reset
button on the left panel. It is necessery to hold down this button continuously at least for
6 seconds and then release it. After pressing this button, the default factory configuration will
be restored and the router will reboot.
It is necessary to use a narrow screwdriver or other small tool in order to press the Reset
button.
F
igure 17: Router reset
All
configuration settings will be set to their default states, so it is recommended first to
back up the router configuration settings (see Configuration manual for more informa-
tion).
19
04-09-19
LUCOM GmbH — Flößaustr. 22a — 90763 Fürth — Tel.: +49 911/ 957 606 00 — E-Mail: info@lucom.de — www.lucom.de
www.lucom.de
To Next Page
Loading...
Need help?
General
