SPC-800(M) User Manual 22
2.3.1 SPC-800 device for support ARM Mounting
Requirement
Pole Mount x 1pc
Installation Procedure
1. Loosen the M3 x 4pcs screws of IO Bracket.
Note! Base Unit Product accessory without a pole mounting
The SPC-800 devices(M)/BOR-DE1000 series are designed for mount-
ing with the base cover IO. If you install the device with an ARM mount-
ing, you must the corresponding relative size and screw hole position
can support the weight of the device or purchase a pole with Advantech
To Next Page
Loading...
