43 SPC-800(M) User Manual
Appendix A OSD Operating Process
A.2.5 Touch
Select “Touch” function by Press Home key and can adjust Touch function
mode.
Always Off: to disable touch function to ensure mis-touch.
Off for 60 sec: to disable touch function and after 60 seconds the touch function will
be enabled automatically.
Always On: default setting of touch function.
Note! Select “Always Off” or “Off for 60 Sec” the device’s LED indicator is Blue
Blinking.
If you want to return Touch settings, Press “Home” key” > Select
“Touch” function.
To Next Page
Loading...
Need help?
General
