41 SPC-800(M) User Manual
Appendix A OSD Operating Process
If “No Signal” message appear, please try to adjust the current selected video input
mode:
DP Source: Make sure the DP connection is enable on the device. To do it,
Press Home key (show to OSD Menu) > Select “Video Input” > Select “Input
DP” > Press Intelligent key
HDMI Source: Make sure the HDMI connection is enable on the device. To do it,
Press Home key (show to OSD Menu) > Select “Video Input” > Select “Input
HDMI” > Press Intelligent key
RX Source: Make sure the CDI+(Input RX) with Box PC connection is enable on
the device. To do it, Press Home key (show to OSD Menu) > Select “Video
Input” > Select “Input RX” > Press Intelligent key
Note! The No Signal message means and LED indicator is Orange that the
device isn’t getting any video input from the currently selected source.
To Next Page
Loading...
