UNO-2483G/2473G User Manual 14
3.1 Inserting a mSATA
1. Remove the power cord.
2. Unscrew the six screws in the bottom cover.
3. Plug a mSATA card with your OS and application program into mPCIe slot.
– UNO-2483G:CN14 with SIM card.
– UNO-2473G:CN16
4. Screw the two screws on board to fix mSATA.
5. Screw back the bottom cover.
3.2 Chassis Grounding
UNO-2483G/2473G provides good EMI protection and a stable grounding base.
There is an easy-to-connect chassis grounding point to use.
Figure 3.1 Chassis Grounding Connection
3.3 Connecting Power
Connect the UNO-2483G/UNO-2473G to a 24 V
DC
power source. The power source
can either be from a power adapter or an in-house power source.
To Next Page
Loading...
Need help?
General
