Advantech USC-360 - Page 24

USC-360 User Manual 18
 Administrator Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password. Set the Administrator password.
 User Password
Select this option and press <ENTER> to access the sub menu, and then type
in the password. Set the User Password.
2.3.2.5 Boot Configuration
 Setup Prompt Timeout
User the <+> and <-> keys to adjust the number of seconds to wait for setup
activation key.
 Bootup NumLock State [ On ]
On or Off power on state for the NumLock
 Boot Option #1/#2/#3
Choose boot priority from boot device