Advantech USC-360 - Component Installation Procedures

USC-360 User Manual 76
3.1 PCB Cover and I/O Cover Installation
3.2 SSD/RAM and Wi-Fi Installation
3.2.1 Install RAM/SSD
3.2.2 Install WIFI module on the M.2 port for USC-360J/USC-360H
濥濸瀀瀂瀉濸澳濜濢澳濶瀂瀉濸瀅
濦瀇濸瀃澳濄 濦瀇濸瀃澳濅
濥濸瀀瀂瀉濸澳濅澳瀆濶瀅濸瀊瀆
濦瀇濸瀃澳濆
濥濸瀀瀂瀉濸澳濅澳濠濦濥澳濖瀂瀉濸瀅
濦瀇濸瀃澳濇
濢瀃濸瀁澳濣濖濕澳濶瀂瀉濸瀅澳濹瀅瀂瀀澳濻濸瀅濸
濦瀇濸瀃澳濈
濣瀅濸瀆瀆澳濩濘濦濔澳濕瀅濴濶濾濸瀇澳濻濴瀅濷
濢瀃濸瀁澳瀇濻濸澳濣濖濕澳濶瀂瀉濸瀅
瀃瀅濸瀆瀆
濦瀇濸瀃澳濉
濟瀂濶濾澳濦濦濗澳瀊濼瀇濻澳濄瀋澳濠濆瀋濈濟澳濦濶瀅濸瀊
濦瀇濸瀃澳濄
濜瀁瀆濸瀅瀇澳瀇濻濸澳濥濔濠
濦瀇濸瀃澳濅
濦瀇濸瀃澳濆
濴濷濷澳瀇濻濸瀅瀀濴濿澳瀃濴濷澳瀂瀁澳瀇濻濸澳濖濣濨澿澳濠濸瀀瀂瀅瀌澳
濴瀁濷澳濦濦濗濁澳濣濿濸濴瀆濸澳濶濻濴瀁濺濸澳瀇濻濸澳濖濣濨澳瀃濴濷澳
濴瀆澳
瀌瀂瀈澳濷濼瀆濴瀆瀆濸瀀濵濿瀌澳瀇濻濸澳瀀濴濼瀁濵瀂濴瀅濷濁
濦瀇濸瀃澳濄
濜瀁瀆濸瀅瀇澳濠濁濅澳瀊濼濹濼 瀀瀂濷瀈濿濸澿澳
濿瀂濶濾澳濄瀃濶瀆澳濠濆瀋濇澳瀆濶瀅濸瀊澳
Install 2pcs Wi-Fi antennae on board
濕濿濴濶濾 antennae: Main
White antennae: Aux
Glue 2pcs other side of Wi-Fi antennae
on both sides, Please change the CPU
pad if as disassembly the Mainboard.
濦瀇濸瀃澳濆濦瀇濸瀃澳濅
濂濣濨濙濧澮