Advantech USC-360 User Manual

USC-360 User Manual 20
2.4 USC-360J BIOS Setup
2.4.1 Introduction
With the AMI BIOS Setup program, you can modify BIOS settings to control the spe-
cial features of your computer. The Setup program uses a number of menus for mak-
ing changes. This chapter describes the basic navigation of the series system setup
screens.
2.4.2 BIOS Setup
The Series system has AMI BIOS built in, with a SETUP utility that allows Users to
configure required settings or to activate certain system features.
The SETUP saves the configuration in the FLASH of the motherboard. When the
Power is turned off; the battery on the board supplies the necessary power to pr
serve the FLASH. When the power is turned on, press the <Del> or <Esc> button
during the BIOS POST (Power-On Self-Test) to access the CMOS SETUP screen.
Table 2.2: Control Keys
← >< → > Select Screen
< ↑ >< ↓ > Select Item
<Enter> Select
<+/-> Change Opt
<F1> General help
<F2> Previous Values
<F3> Optimized Defaults
<F4> Save & Exit
<Esc> Exit

Advantech USC-360 Specifications

General

Brand	Advantech
Model	USC-360
Category	Touch terminals
Language	English