Advantech USC-360 User Manual

35 USC-360 User Manual
Chapter 2 System Setup
2.4.2.6 Save & Exit Configuration Setting
 Save Changes and Reset
When users have completed system configuration, select this option to save
changes, exit BIOS setup menu and reboot the computer to take effect all system
configuration parameters.
1. Select Exit Saving Changes from the Exit menu and press <Enter>. The follow-
ing message appears: Save Configuration Changes and Exit Now? [Ok][Cancel]
2. Select Ok or cancel.
 Discard Changes and Reset
Select this option to quit Setup without making any permanent changes to the system
configuration1. Select Reset Discarding Changes from the Exit menu and press
<Enter>.
The following message appears: Discard Changes and Exit Setup Now? [Ok]
[Cancel]
1. Select Ok to discard changes and reset. Discard Changes
Select Discard Changes from the Exit menu and press <Enter>.
 Restore Default
The BIOS automatically configures all setup items to optimal settings when users
select this option. Defaults are designed for maximum system performance, but may
not work best for all computer applications. In particular, do not use the Defaults if the
user's computer is experiencing system configuration problems. Select Restore
Defaults from the Exit menu and press <Enter>.
 Boot Override
Shows the boot device types on the system

Advantech USC-360 Specifications

General

Brand	Advantech
Model	USC-360
Category	Touch terminals
Language	English