Advatek Lights PixLite 16 Mk2

Grace SandovalJul 31, 2025

What to do if Advatek Lights PixLite 16 Mk2 has no power or status LEDs?

C
Charles MartinJul 31, 2025
If your Advatek Lights Controller shows no power or status LEDs, verify that the power supply is providing the correct voltage as specified in Section 4.1. Also, check that the power supply can provide enough current to power all connected lights. Try disconnecting all outputs to see if the controller powers on. If the power supply is correct, attempt a firmware recovery update.

Brand	Advatek Lights
Model	PixLite 16 Mk2
Category	Controller
Language	English

Brand

Advatek Lights

Model

PixLite 16 Mk2

Installation

Supplying Power

Details on connecting DC power to the controller's power banks and voltage requirements.

Output Fuses and Power Injection

Information on individual output fuse protection and when to inject power directly.

Logic Power

Explains that logic power is regulated from power bank 1 input.

Control Data Connection

How to connect Ethernet data using sACN (E1.31) or Art-Net protocols.

Connecting Pixel LEDs

Instructions on wiring LED lights to the 16 pluggable screw terminal connectors.

Expanded Mode for Pixels

Enabling expanded mode uses clock lines as data lines for more outputs.

Network Configuration

Network Layout

Illustrates typical network topologies for the PixLite 16 Mk2 controller.

IP Addressing

Details on how the controller obtains an IP address via DHCP or static assignment.

Using a Router for IP Addressing

Explanation of how routers provide IP addresses via DHCP and default behavior.

Using a Switch or Direct Connection

Configuration for connecting without a DHCP server and setting PC network adapter.

Forcing the Default IP Address

Procedure to reset controller's IP to default (192.168.0.50) using the Factory IP button.

Operation

Start-up Procedure

Describes the controller's power-up sequence and LED indicators for normal operation.

Sending Data to Controller

How to send input data via Ethernet using DMX over IP protocols like sACN or Art-Net.

Pixel Outputs

Details on the 16 outputs, universe capacity, and pixel type considerations.

DMX512 Outputs

Details on the 4 DMX512 outputs, RS485 standard, and wiring configurations (ESTA/LOR).

Fan Output

Describes the auxiliary fan output for cooling, its power capability, and protection.

Hardware Test Pattern

Instructions on activating and using the built-in test pattern for troubleshooting.

Firmware Updates

Performing a Standard Update

Step-by-step guide to updating the controller's firmware using Advatek Assistant.

Performing a Recovery Firmware Update

Procedure for recovery firmware update if the standard update fails or controller errors occur.

Specifications

Operating Specifications

Details recommended operating conditions including voltage, current, and ambient temperature.

Mechanical Specifications

Information on board dimensions, mounting hole sizes, and enclosure compatibility.

Troubleshooting

LED Codes

Explanation of status, power, and Ethernet LED codes for diagnosing issues.

No Power or Status LEDs

Steps to diagnose and resolve issues when the controller has no power or status LEDs.

No Pixel Control

Checks for correct IC type, wiring, fuses, and software configuration for pixel control.

Reset to Factory Defaults

Procedure to reset the controller to its default settings using specific button combinations.

Advatek Lights PixLite 16 Mk2 - User Manual

Table of Contents

Questions and Answers