11
22
Install two "AA"
batteries matching the
+/- polarities of the
battery to the +/- marks
inside the battery
compartment.
Open the battery cover. Replace the battery
cover.
When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
When direct sunlight, and incandescent lamp, fluorescent
lamp or any other strong light shines on the REMOTE
SENSOR, the remote control function may be unstable.
Do not try to recharge batteries they are not intended to be
recharged.
Use only the size and type of batteries specified. Do not mix
different types of batteries together or old batteries with
fresh ones.
When the remote control will not be used for a long period of
time or when the batteries are worn out, remove the
batteries.
Do not throw the batteries into a fire. Dispose of or recycle
used batteries properly.
Do not drop, dampen or disassemble the remote control.
33
Installing batteries
Effective range of the Remote
8
Getting Started(continued)
5m
3
0
3
0
Notes:
If your remote control does not work correctly, the code setting may be incorrect. Please
try the following:
1. Press and hold the SET button and the TV button at the same time until the indicator lights
up.
2. Press 1, 5, 3. The indicator of the remote control will blink twice. If not, please repeat the
above steps.
Important notes about the Remote Control Unit:
To Next Page
Loading...
General