ADX FIREFIGHT WIRELESS 23 - Customising the Backlight Effect

15
Customising
the Backlight Eect
You may customise the backlight for each button.
1. Press Fn +
repeatedly to select customise backlight
mode. Buttons WASD will light up as the rst time.
2. Press and hold Fn +
to enter backlight setting
mode. CAPS and WIN buttons will start ashing.
3. Press the button(s) repeatedly to choose the colour you
wish (8 colours + 1 colourless).
4. Press and hold Fn +
when done. CAPS and WIN
buttons will stop ashing.
To reset customised backlight eect to default
setting, press and hold Fn + until all
backlights start lighting in succession.