4
PD201806 AEG GRID-TIED SINGLE-PHASE SOLAR INVERTER V.1-18 EN
4
1. Safety Precautions
This section describes relevant warning symbols recurring in the installation and operation manual of AEG single-phase
solar inverters of the series AS-IR01 and AS-IR01-2.. Icons highlight relevant information for the physical and property
safety of the user. Compliance to the provided instructions is essential to prevent physical injury and product damage.
1.1 Icons
Below is a list of the icons used in this manual:
Icon Meaning Instruction
Danger
Serious physical injury or even death may occur in case of
noncompliance with the requirement.
Warning
Physical injury or product damage may occur in case of
noncompliance with the requirement.
Prohibited
Damage may occur in case of
noncompliance with the requirement.
Hot surface Product surface may become hot. Do not touch.
Note Useful information for product maintenance and operation is provided
Table 1: Icon meaning
1.2 Safety Guidelines
Look for any visible damage to the package or the product itself. Double-check the order information
and the product nameplate to ensure the products are of the ordered type. Should you find any
problems, contact the shipping company and / or your supplier as soon as possible before attempting
product installation.
Only qualified electricians are allowed to install the inverter.
To Next Page
Loading...
