19
Using the Oven
Positioning the Shelf Unit and the Universal Baking Tray
All slide-in units have a small bulge on the left and right. This bulge
serves as an anti-tip device and must always point downwards.
Inserting shelf unit
0 Insert the shelf unit with both guide
rails pointing upwards. The anti-tip
device must point downwards and
be positioned to the rear of the
oven compartment.
Inserting the shelf unit and tray
0 When the shelf unit and universal
baking tray are used together, care-
fully place the shelf anti-tip device
in the bulges on the tray.
To Next Page
Loading...
Need help?
General