Display Teletext
Press the “TTX” button to access Teletext.
B
Press the “ENTER” button.
B
Enter the desired page number with the numeric buttons.
B
NOTE:
This function is only available if the selected channel oers Teletext.
Press “EXIT“ to exit the Teletext function.
B
Select Audio Setting
This setting allows you to toggle between stereo and (mono) left or
(mono) right.
Press the “AUDIO” button to change the audio settings.
B
Repeatedly press
B
► until the desired setting is displayed on the
screen.
Press “EXIT” to return to normal display mode.
B
Swap Function
Press “RECALL“ to return to the previously selected channel.
B
Zoom Function
Press “
B
ZOOM” button to activate the zoom function.
Use the “
B
/” buttons to enlarge or minimize the picture.
Press “
B
ZOOM” button again to deactivate the zoom function.
TV Screen Interface
The OSD menu allows you to carry out personalized receiver settings.
Turn receiver and TV set on to display the OSD. It consists of main
menu and submenus.
Press the “MENU” button.
B
The main menu is displayed.
On the right side you have a preview of the current channel.
Use the navigation buttons
B
▼ and ▲ and “ENTER” to select the
desired submenu.
The submenu is displayed.
Submenu Design
Top: Menu name
Left: Menu items
Right: Preview of current channel
Ch
■
annel Manager: Sort, group, edit and delete the stored
channels.
Installation:
■
Toggle between Auto Search, Manual Search and
Frequency Search; see page 47.
Conguration:
■
Here you can change the system settings of the
unit; see page 45.
To Next Page
