Hit Rat
Select “Hit Rat” and press “ENTER” to play the Hit Rat game.
B
Press the “ENTER” button in eld “New Game” to start the game.
B
In this game you must “hit” the rat with the numeric buttons (1-9).
The game is over as the playing time is elapsed.
Press the “ENTER” button to pause the game and to change to
B
the left option column. In the option column the following menu
items are available:
New Game = Start a new game.
•
Speed = Set speed level.
•
Score List = The score list is displayed at the bottom left.
•
Help = Press
•
/ to page through the help le at the
bottom left.
Exit Game = Return to the “Native Games” submenu.
•
Continue = The game continues.
•
Main Menu = Return to the “Hit Rat” menu.
•
Troubleshooting
Consult the following table to troubleshoot errors prior to sending the device to customer service.
Errors Cause Solution
Network display light
not on
Lack of power supply
Warning:
Turn o the device prior to troubleshooting.
Check if the mains plug is connected correctly. If
necessary, test the outlet with another device for
functionality.
No power supply/ main switch
turned o
Turn the unit back on again with the main switch
(Fig. 1/17).
No screen display TV operation:
Video cable incorrectly connected.
Warning:
Turn of the device prior to troubleshooting.
Check the proper position of the video cable. Check if the
plug is plugged tightly into the out let.
No reaction upon
pressing
Power supply issues or static
charge of the device.
Turn of the main switch and disconnect the mains plug.
Re-connect mains plug and turn device on.
No sound TV operation:
Audio cable not connected
Warning:
Turn of the device prior to troubleshooting.
Ensure correct connection of the audio cable. Check if the
plug is plugged tightly into the out let.
Volume set too low Turn VOLUME control to increase the volume (Fig. 1/22).
Headphones plugged in incor-
rectly
Check for correct t of the headphone plug.
Remote does not
function
Incorrect position The remote control does not point toward the device.
Distance too far Ensure that the distance between remote control and
device does not exceed 5 meters.
Empty battery Change battery in the remote control.
To Next Page
