EasyManua.ls Logo

AEG Protect A Series - Technical Data

AEG Protect A Series
33 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
3.3 Technical Data
Type rating
Type ratingType rating
Type rating
Protect A 500 LCD 500 VA / 300 W
Protect A 700 LCD 700 VA / 420 W
Protect A 1200 LCD 1200 VA / 720 W
Protect A 1600 LCD 1600 VA / 960 W
UPS input
UPS inputUPS input
UPS input
Nominal connection voltage 230 Vac
Voltage range without battery 170 Vac to 280 Vac
Frequency (automatic detection) 50 / 60 Hz
Connection Non-heating appliance
connector IEC 320 C 14
UPS output
UPS outputUPS output
UPS output
Rated output voltage 230 Vac
Rated output voltage in ±10 %
battery operation
Frequency in battery operation 50 Hz / 60 Hz ± 1 Hz
Nominal output current 2.2 A (Protect A 500 LCD)
3.0 A (Protect A 700 LCD)
5.2 A (Protect A 1200 LCD)
7.0 A (Protect A 1600 LCD)
Changeover time in the event 2-6 ms (Protect A 500
of mains failure (typical)
LCD and Protect A 700
LCD) 4-8 ms (Protect A
1200 LCD and Protect A
1600 LCD)
Type of voltage wave Modified sine wave
Connection 4* IEC outlet (Protect A
500 LCD/700 LCD)6* IEC
outlet (Protect A 1200
LCD/1600 LCD)
Protection against over- Yes
temperature and short circuit

Related product manuals