26
Connected by USB to a PC or notebook, the Software enables
communication between the UPS and the computer. The UPS
software monitors the status of the UPS, shuts down the system
before the UPS is exhausted and can remotely observe the UPS via
the Network (enabling users to manage their system more
effectively). Upon AC failure or UPS battery low, UPS takes all
necessary actions without intervention from the system administrator.
In addition to automatic file saving and system shut-down functions,
it can also send warning messages via
pager, e-mail etc.
• Use the bundled CD and follow the on-screen instructions to
install the software.
• Enter the following serial No. to install software: 511C1-01220-
0100-478DF2A
• After the software is successfully installed, the communication
with UPS has been established and a green icon will appear in
the system tray.
• Double-click the icon to use the monitor software (as above).
• You can schedule UPS shutdown/start-up and monitor UPS
status through PC.
•
Detail instructions please refer to the e-manual in the software.
Check www.aegps.com, than go to Products / Monitoring solutions
from time to time to get the latest version of monitoring software.
6. SOFTWARE INSTALLATION ON YOUR
PC
To Next Page
Loading...
