25
5.5 Connect 1000Mb Ethernet for
Surge Protection
Connect for example a single modem line into surge-protected outlet
on the back panel of the UPS unit. Connect from another outlet to the
computer with another line cable.
5.6 Connect USB Cable
To monitor the UPS status, such as unattended UPS shutdown and
start-up, by using bundled software, please connect the UPS and PC
with USB cable included.
NEVER
NEVER NEVER
NEVER connect a laser printer or scanner to the UPS unit, because
in-rush current generated by motor’s devices may cause the damage
of the unit.
5.7 Turn On/Off the Unit
Turn on the UPS unit by pressing the power switch. Turn off the UPS
unit by pressing again the power switch.
Normally, the UPS operates continuously. The UPS now supplies the
output with voltage, this being signalled by the LCD display.
To Next Page
Loading...
