EasyManua.ls Logo

AEG protect d. 3000 - Page 12

AEG protect d. 3000
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
UPS output
Nominal output voltage 200/208/220/230/240 Vac ± 2%
Power reduction:
10% at 208V, 20% at 200V
Nominal frequency 50 Hz / 60 Hz ± 0.25 Hz
(Tolerance in battery mode
or free running in frequency
changer mode)
Synchronization range 50 Hz or 60 Hz ± 3 Hz
Synchronization speed 1 Hz / s
Power factor range 0.8 lag. to 0.9 cap.
for full power output
Power reduction:
10% to 0.5lag., 20% to 0.5 cap.
Voltage waveform Sine, distortion
< 3% THD (linear load)
< 6% THD (non-linear load)
Crest factor 3:1
Overload behavior to 110% continuously;
with mains supply 110% – <130% for 5 min.
130% – <150% for 15 s
150% for 300 ms
Overload behavior to 102% continuously;
with battery operation 110% – <130% for 12 s
130% – <150% for 2 s
150% for 100 ms
Short-circuit behaviour 4.4 x I
N
for 100 ms

Related product manuals