BN 09 2671/01/01 - 2 / 50 -
AEG Power Solutions is a world specialist in AC and DC power conversion.
The company designs and manufactures rectifiers, inverters and power electronics
systems associated with all types of batteries.
The applications range from Transmission and distribution, Oil & Gas,
Petrochemicals, Transport, Power, Manufacturing and Telecommunications
Industries through to Military applications.
AEG Power Solutions makes available to its customers its theoretical and practical
training centre at various locations.
This equipment has been designed to meet the requirements of the European Directives
applicable to the product concerned, i.e. Directive on Electromagnetic compatibility (EMC)
N° 2014/30/EU of 18-04-2014. To comply the units are equipped with the necessary input
filters where applicable. Together with the compliance to Low Voltage Directive
N° 2014/35/EU of 18-04-2014, the systems have the CE mark.
The delivered equipment is conform with these Directives as long as the user does not
change its electrical and mechanical characteristics.
This equipment is designed to be used in an industrial environment.
WARNING :
THIS PRODUCT IS FOR RESTRICTED DISTRIBUTION TO INFORMED INSTALLERS OR USERS.
INSTALLATION RESTRICTIONS OR ADDITIONAL MEASURES MAY BE NECESSARY TO AVOID
DISTURBANCES.
If the units are equipped with an EMI suppression filter on the AC input, high leakage currents to the chassis are
generated. Always connect the earth connection first before any other connection. Danger to the operator can
occur if the units are not firmly connected to earth.
The units contain DC capacitors on the output of the DC line. Allow 5 minutes for the discharge of the capacitor
bank when the system is completely powered down and in any case, always check the absence of voltage on the
system terminals and at capacitors terminals prior to maintenance operations.
This equipment has been designed to be connected to class II power supplies with over voltages not
exceeding 2500 V peak. All precautions should be taken to stay within these limits.
To Next Page
Loading...
Need help?
General
