AEG PROTECT RCS - Configuration Functions

- 29 / 50 - BN 09 2671/01/01
6.7 CONFIGURATION FUNCTIONS
6.7.1 How to Change the Language
Two languages are available in your GCAU board: the standard language (English) and a second one: the one you
specified when you ordered your equipment.
To change the language, follow the instructions below:
6.7.2 How to set Date and Time
FLOATING CHARGE
Monit Confg Cmnd
SET LANGUAGE
Next Enter Exit
Language:English
Next Change Exit
FLOATING CHARGE
Monit Confg Cmnd
SET DATE & TIME
Next Enter Exit
Hours: 10
  Enter
Minutes: 12
  Enter
Month: 4
  Enter
Day: 12
  Enter
Year: 2006
  Enter
Starting from the main menu select ‘Confg’.
Select ‘Next’ until the following menu is displayed.
Press ‘Ente
r
’.
Press ‘Next’ until the desired language is shown.
Pressing the ‘Change’ key will update the selected
language.
Starting from the main menu select ‘Confg’.
Select ‘Next’ until the following menu is displayed.
Select ‘Enter’.
Use the up/down arrows to select the set point of hours.
Hit ‘Enter’ key to go to next menu.
Use the up/down arrows to select the set point of minutes.
Hit ‘Enter’ key to go to next menu.
Use the up/down arrows to select the set point of month.
Hit ‘Enter’ key to go to next menu.
Use the up/down arrows to select your the set point of
day. Hit ‘Enter’ key to go to next menu.
Use the up/down arrows to select the set point of year.
Hit ‘Enter’ key to come back to the ‘SET DATE & TIME’
menu.