Aercus WeatherRanger - Page 54

Aercus Instruments™ - WeatherRanger® 54 |
P a g e
Figure 38
Increase
calibrated
value
Decrease
calibrated
value
Select
value
Select
value
Scroll
field up
Scroll
field
down
Enter sub-
setup
mode
Return
home
Press the key to go back to the Normal Display Mode. The wind direction should now read
0º North. Reference Figure 39
Figure 39
Make sure you remove the sticky tape from the wind vane!
Step 6: Install the Outdoor Sensor Array outside as per 3.3 and face the solar panel North.