EasyManua.ls Logo

AERMEC MVA - Disposal; Troubleshooting

AERMEC MVA
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
This marking indicates that this product should
not be disposed with other household wastes
in the entire EU.
To prevent any harm to the environment or
human health caused by incorrect disposal
of Waste Electrical and Electronic Equipment
(WEEE), please return the device using suita-
ble collection systems, or contacting the re-
tailer where the product was purchased. For
further information please contact the appro-
priate local authority.
Unlawful disposal of the product by the user
may result in the application of administrative
fines based on current laws.
12. DISPOSAL
13. TROUBLESHOOTING
ITEMS TO CHECK POSSIBLE ANOMALY SITUATION
Is the unit firmly fixed? The unit could fall, vibrate or generate
noise.
Has a check for refrigerant leaks been
performed?
Poor performance.
Is the thermal insulation sufficient? It could cause condensate and dripping
water.
Does the unit correctly drain the con-
densate water?
It could cause condensate and dripping
water.
Does the power supply voltage
correspond to the one indicated on the
label?
Electrical operating fault or damage to
components which could be blown.
Have the cables and pipes been con-
nected correctly and safely?
Electrical operating fault or damage to
components which could be blown.
Has the unit been safely grounded via
an earth connection?
Risk of electrocution. Damage to com-
ponents.
Have the guidelines the manual regard-
ing electric cable type and section
been followed?
Failure to do so could cause electrical
operating faults or damage to compo-
nents which could be blown.
Are the air inlet and outlet on the indoor
unit free of obstacles?
Poor performance.
Have the pipe length and refrigerant
charge been recorded?
Poor performance. Impossible to check
the amount of refrigerant added.

Related product manuals